2
Chapter 6. IP Wizard Installation and operation
This chapter shows how to quick set up your IP surveillance product. The IP
surveillance product is with the default settings. However to help you find the
networked camera quickly the windows utility-IP Wizard can search the cameras in
the network that shall help you to configure some basic setting before you started
advanced management and monitoring.
6.1 IP Wizard Installation
Note
In the installation steps below, this guide use ICA-108 as the
example. However, the steps for ICA-108W/M230/230/501/601/651
are similar.
1. Insert the bundled CD into the CD-ROM drive to launch the autorun program.
Once completed, a welcome menu screen will appear.
2. Select the click the model name of your IP camera.
3. Click the “IPwizard Utility” hyperlink; you will see the InstallShield Wizard dialog
box as below.
Note
If the welcome screen does not appear, click “Start” at the taskbar.
Then, select “Run” and type “D:\Utility\IPWizard\setup.exe”, assume
D is your CD-ROM drive.
