Planet ICA-102 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 46

Planet ICA-102 Скачать руководство пользователя страница 7

Internet Camera User Guide

4

Focus Ring

Normally, it is not necessary to adjust the focus. The default
focus range is from 1 meter (3 feet) to infinity. If the image is
not clear, try adjusting the focus.

Microphone

The built-in microphone is mounted on the front. There is also
a connection for an external microphone on the rear. Connect-
ing an external microphone will disable the built-in
microphone.

Ready LED

On

- Power on.

Off

- No power.

Blinking

- The

Ready

LED will blink during start up. This will

take 15 to 20 seconds.

Active LED

Off

- Idle.

Blinking -

Wireless/Ethernet Internet Camera is

providing a

live video stream to at least one viewer.

LAN LED

On

- LAN port is connected to a hub or switch.

Off

- LAN port is not connected.

Blinking

- Data is being transmitted or received via the LAN

port.

Wireless LED

(Wireless Internet Camera only)

On

- Wireless interface is active.

Off

- Wireless interface is not available.

Blinking

- Data is being transferred via the Wireless interface.

Rear Panel

Antenna

Attach the supplied antenna here. The antenna is adjustable;
best results are usually obtained with the antenna positioned
vertically.

Power Input

Connect the supplied power adapter here.

MIC In

If required, an external microphone can be attached here.
Attaching a microphone here will disable the built-in micro-
phone on the front. Microphones designed to be used with
PCs are usually compatible with this microphone input.

«
...
5
6
7
8
9
...
»

Содержание ICA-102















































Отзывы:

Нет отзывов