4.4 Getting Started
>”
prompt. The screen of available commands in
Figure 4-4
appears,
and the detail description shown in Table 4-1.
4.4.1 General Guidelines
The GSW-2416SF allows users to configure the device via command line under console interface. Please type
“help”
or
“?”
for all available commands in the”
GSW-2416SF
Figure 4-4
GSW-2416SF available commands screen
Command
Description
show port
Show all port current status of GSW-2416SF.
show static [n]
Show per port TX/RX static of GSW-2416SF.
show vlan
Show current VLAN group status of GSW-2416SF.
show ip
Show current IP subnet address and default gateway information of
GSW-2416SF.
show version
Show current Software and Hardware versions of GSW-2416SF.
show flowcontrol
Show current flow control status on each port of GSW-2416SF.
show vlantag
Show current VLAN Tagged status on each port of GSW-2416SF.
show vlanaware
Show current VLAN aware status on each port of GSW-2416SF.
show priority
Show current priority status of GSW-2416SF.
show pvid
Show current
PVID value on each port of GSW-2416SF.
show vid
Show current VLAN ID of each VLAN Group of GSW-2416SF.
set port [n]
Set per port auto-negotiation, speed duplex mode, and admin down of
GSW-2416SF.
set vlan [n]
Assign port to specific VALN Group of GSW-2416SF.
EM-GSW2416SFv1
- 14 -
