Planet GSD-808HP Скачать руководство пользователя страница 2

Trademarks

Copyright © PLANET Technology Corp. 2013.

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.  All other trademarks 
belong to their respective owners.

Disclaimer

PLANET  Technology  does  not  warrant  that  the  hardware  will  work  properly  in  all 
environments  and  applications,  and  makes  no  warranty  and  representation,  either 
implied  or  expressed,  with  respect  to  the  quality,  performance,  merchantability,  or 

fitness for a particular purpose.

PLANET  has  made  every  effort  to  ensure  that  this  User’s  Manual  is  accurate; 
PLANET  disclaims  liability  for  any  inaccuracies  or  omissions  that  may  have 
occurred.

Information in this User’s Manual is subject to change without notice and does not 
represent  a  commitment  on  the  part  of  PLANET.  PLANET  assumes  no  responsibility 
for  any  inaccuracies  that  may  be  contained  in  this  User’s  Manual.  PLANET  makes 
no  commitment  to  update  or  keep  current  the  information  in  this  User’s  Manual, 
and  reserves  the  right  to  make  improvements  to  this  User’s  Manual  and/or  to  the 
products described in this User’s Manual, at any time without notice.

If  you  find  information  in  this  manual  that  is  incorrect,  misleading,  or  incomplete, 

we would appreciate your comments and suggestions.

FCC Warning

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B 
digital  device,  pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to 
provide  reasonable  protection  against  harmful  interference  when  the  equipment  is 
operated  in  a  commercial  environment.  This  equipment  generates,  uses,  and  can 
radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance  with 
the  Instruction  manual,  may  cause  harmful  interference  to  radio  communications. 
Operation  of  this  equipment  in  a  residential  area  is  likely  to  cause  harmful 
interference  in  which  case  the  user  will  be  required  to  correct  the  interference  at 
his own expense.

Содержание GSD-808HP

























Отзывы: