GRT-501 G.SHDSL.bis Bridge Router User’s Manual
- -
18
Step 3.
Assign the IP pool for your DHCP
server. Click
Next
.
For example:
If the LAN IP address is
192.168.0.1
, the IP range of LAN is
192.168.0.2
to
192.168.0.51
. The
DHCP server assigns the IP form
Start IP Address to End IP Address.
The legal IP address range is form 0
to 255, but 0 are reserved as
network name and 255 are reserved
for broadcast. It implies the legal IP
address range is from 1 to 254. That
means you cannot assign an IP
greater than 254 or less then 1.
Lease time
72
hours indicates that
the DHCP server will reassign IP
information in every 72 hours.
Step 4.
Enter Parameters in
BASIC –
STEP4
Wan Parameters;
VPI: 0
VCI: 32
AAL5 Encapsulation: LLC
Protocol
:
IPoA , EoA , IPoA + NAT
or
EoA + NAT
Click
Next
to setup the IP
parameters.
Step 5.
Enter Parameters in
WAN
setting.
1. IP Address: 10.1.2.1
2. Subnet mask: 255.255.255.0
3. Gateway: 10.1.2.2
Your ISP will provide above
information to you.
4. DNS Server 1: 168.95.1.1
Your ISP will provide at least one
DNS Server IP address.
5.
Click
Next.
Step 6.
The screen will prompt the new configured parameters. Check the parameters and click
Restart.
The router
will reboot with the new setting or press
Continue
to configure another parameters.
