Planet G.SHDSL.bis Bridge Router GRT-504, Руководство пользователя

Страница: 142 / 152

GRT-504 4-Wire G.SHDSL.bis Firewall Router User’s Manual
Authe command can configure authentication code.
You can review the list of RIP parameters via
list command.
7.12.9 LAN
LAN interface parameters can be configured LAN IP address, subnet mask and NAT network type.
>> Ip_type
Address
IP type
LAN IP address and subnet mask
Attrib NAT network type
7.12.10 IP share
You can configure Network Address Translation (NAT), Port Address Translation (PAT) and
Demilitarized Zone (DMZ) parameters in
ip_share menu.
7.12.10.1 NAT
NAT (Network Address Translation) is the translation of an Internet Protocol address (IP address)
used within one network to a different IP address known within another network. One network is
designated the inside network and the other is the outside. Typically, a company maps its local
inside network addresses to one or more global outside IP addresses and reverse the global IP
addresses of incoming packets back into local IP addresses. This ensure security since each
outgoing or incoming request must go through a translation process, that also offers the
opportunity to qualify or authenticate the request or match it to a previous request. NAT also
conserves on the number of global IP addresses that a company needs and lets the company to
use a single IP address of its communication in the Internet world.
To configure Network Address Translation (NAT), Move the cursor “
>> ” to ip_share then press
enter.
>> nat Configure network address translation
pat Configure port address translation
dmz Configure DMZ host function
You can configure NAT parameters in
nat menu.
>> virtual Virtual IP address pool
global Global IP address pool
Fixed Fixed IP address mapping
The
virtual menu contains range of virtual IP address, delete virtual IP address, and show virtual
IP address.
>> range Edit virtual IP address pool
delete Delete virtual IP address pool
List Show virtual IP address pool
141