manualshive.com logo in svg

Planet FSD-1600SC, Руководство пользователя

Поделиться
Скачать
Planet FSD-1600SC Скачать руководство пользователя страница 11

8

9

domain, reducing the overall load on the network.

The  Switch  performs  “Store-and-forward”  therefore,  no  error  packets  occur.    More 
reliably, it reduces the re-transmission rate.  No packet loss will occur.

Auto-Negotiation

The  STP  ports  on  the  Switch  have  built-in  "Auto-Negotiation."  This  technology 
automatically  sets  the  best  possible  bandwidth  when  a  connection  is  established  with 
another network device (usually at Power On or Reset). This is done by detect the modes 
and speeds at the second of both device is connected and capable of. Both 10Base-T and 
100Base-TX devices can connect with the 100Base-TX port in either Half- or Full-Duplex 
mode.

If attached device is:

100Base-TX port will set to:

*10Mbps, no auto-negotiation

10Mbps

*10Mbps, with auto-negotiation

10/20Mbps (10Base-T/Full-Duplex)

*100Mbps, no auto-negotiation

100Mbps

*100Mbps, with auto-negotiation

100/200Mbps  (100Base-TX/Full-Duplex)

3.2 The Smart Function (16-port model)

The FSD-1600 and FSD-1601 is with one DIP switch on the rear of the switch, these ON/
OFF switches provides the functions as below:

•  Twisted Pair or Fiber-optic selection

•  Port based VLAN 

•  Port Trunking

•  ToS/ QoS selection

•  Priority Setup

They are all in OFF position by default!

3.2.1 TP or Fiber-optic selection (for FSD-1601 only)

Related DIP: 1, 2

Default meaning: Port#16 runs in Twisted pair, Auto-Negotiation.

DIP 1: 

Turns on will force the fiber-optic port enabled. 

 

NOTE:

Please do not turn on if you are using FSD-1600.

DIP 2: 

Turns on will force the 100Base-FX fiber-optic port runs in Full-duplex mode.

Содержание FSD-1600SC























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды