11
4.2 Utility Operating
After installation, you can find the utility in “Start” => “Programs” => “Marvell” => “Virtual Cable
Tester”. Please click “Virtual Cable Tester” option to start. If you have see the dialog box as below,
please make sure you are using ENW-9700 and the card had been install to your PC properly.
When the utility starts, you will see the screen as below. If you have install two or more ENW-9700
to your PC, please select the card you want to test in the first field, then click “Run” button the
diagnostic the cable status of selected ENW-9700 connected.
