4
LED
Description
100 / 1000
Off/Off: Works with 10Mbps
On/Off: Works with 100Mbps
Off/On: Works with 1000Mbps
FDX
Off: Works in Half-Duplex mode
On: Works in Full-Duplex mode
ACT
Blink: Transmitting or receiving data through the LAN
Table 2-1
Descriptions of ENW-9607 LEDs
LED
Description
1000
Off: The connection is not established.
On: The connection is not established.
FDX
On: Works in Full-Duplex mode
ACT
Blink: Transmitting or receiving data through the LAN
Table 2-2
Descriptions of ENW-9607M LEDs
2.2 Hardware Installation
Step 1: Turn off the PC.
Step 2: Remove any metal decorations from your hands and wrists.
Step 3: Remove the cover from your PC.
Step 4: Locate an empty, non-shared bus mastering PCI slot and remove the corresponding back
plate. Save the screw for use in Step 6.
Step 5: Carefully insert the adapter into the chosen slot and press firmly with proper push to
ensure it is fully seated in the slot.
Step 6: Secure the adapter with the screw you saved in step 4.
