10
Appendix A Advanced Properties
The default settings of the adapter should work in most cases. However, if you experience any unusual
circumstances during your installation, these settings may help you to trouble shoot the adapter. Do not
change any of these settings without a thorough understanding of the specifics of your network. The
following table briefly explains the function of each property.
Property
Description
Default Value
Auto-Negotiate capabilities
Auto negotiate LAN speed and duplex
On
IEEE Compliance Enable
Allow your PC to communicate with other
devices set to operate on the IEEE standard.
Auto
Interrupt Hold Off Time
Specifies the time the adapter will wait for a
busy interrupt request.
1(0-255)
Network Address
Allow the user to configure the network
address of the adapter.
Not Present
Link Speed
This option is use to control the card will use
fixed link speed to work or auto detect the
link speed to fit to the network environment.
Auto
Wake Up Capabilities
Select one of the methods to let the card
’
s
Wake-On-LAN function work.
OS Controlled
