2 Installation
Hardware Outlook
Hardware Installation
To insert a card into your computer,
please refer to the following:
1. Turn off the computer and remove its
cover.
2. Insert the card into a PCI slot.
3. Secure the card to the rear of the
computer chassis and put back the
computer cover.
4. Connect the product to the network
using twisted-pair cables (Cat5 UTP
for 100Mbps, Cat 3, 4, 5 UTP for
10Mbps), depending on the connector
you are using.
Card Configuration
ENW-9501 Plus is automatically
configured when you power-on computer.
In certain computer, however, you must
modify BIOS by entering CMOS setup
utility to enable "PCI Device" and map
INTA to an appropriate address. Please
refer to the system documentation for
details on configuration the PCI system
BIOS.
Driver Installation
Before you connect adapter to the network,
you have to install the network driver first.
The driver for each networking operation
system is under the separated directory.
Please refer to the file HELPME.EXE
under root directory lists the information
and detailed installation procedure of all
the available drivers.
Note:
The bundled driver is used only for
the adapter in the package.
Boot ROM Installation (Optional)
The optional boot ROM device allows you
to connect a diskless workstation to the
network. Perform the following steps to
install your boot ROM device:
1. Insert the boot ROM into the socket on
the adapter with correct direction and
firmly. Make sure the pin is not bent.
2. Refer to the installation procedure
provided by networking operation
system.
Appendix A.
Technical Specifications
Standard
: IEEE 802.3u 100Base-TX,
IEEE802.3, 10Base-T
Bandwidth
: 10 /20 Mbps, 100/200Mbps
Hardware
: PCI bus Spec. Ver 2.0
LED
: 3; 10/LINK, 100/LINK,
ACT
IRQ
: Assigned by PCI BIOS
I/O Address : Assigned by PCI BIOS
Boot ROM
Address
: Assigned by PCI BIOS
Driver
Support
: Novell Netware3.x ,4.x
Windows NT3.1, NT3.5,
NT3.51, NT4.0, Windows
for workgroups 3.x,
Windows 95, TCP/IP Packet
Driver
Temperature
: 0 ~ 55 degree C
(operating)
Humidity
: 10%~90% (Non-condensing)
Weight
: 70 gw
Dimension
: 128 mm x 63 mm
Emission
: FCC class A; CE
digital
21143
B
oo
t
R
O
M
S
o
ck
et
ACT
1
0
0
/L
IN
K
1
0
/L
IN
K
EM9501Plus
