37
SETP 3:
Using your remote control, press
2
to enter the
Setup
screen. You will then
see three tabs on the left side of the screen. Press the
DOWN
arrow twice to
move to
Initial Setting
.
SETP 4:
Press the
RIGHT
button once, and then
DOWN
button to select
Firmware
Version
, and then press the
ENTER
button.
After entering the Firmware version menu, you may now verify the current
installed firmware version in DMA-100.
Firmware Upgrade
In most circumstances, it is not required to perform firmware upgrade. In some spec-
tacular scenario, you might need to upgrade the firmware of the
DMA-100
when there
is a patch firmware available from your local distributor.
SETP 1:
Before upgrading the firmware, the firmware file should be placed in the proper
folder in the DMA Media Server
“
Upgrade Bin file
”
menu.
