Planet BSP-360, Быстрое руководство по установке, Страница: 9 / 24

9
Battery In/Out
24V DC
Battery DC Input: 24V , 10A
PV DC Input: 24-45V , 8.8A max.
Max. Fault Alarm Loading: 24V, 1A V+
PV Bat. Alarm
V+
Warning
Please make sure the V+ & V is connected correctly,
and the wire gauge meets the maximum current.
1 2 3 4 5 6
Battery
24V DC
DC
DC
Note
The wire gauge for the terminal block should be in the range from
16 to 20 AWG .
Fault Alarm Connectors
The fault alarm contacts are in the middle (3 & 4) of the terminal block connector
as the picture shows below. Inserting the wires, the Renewable Energy Switch will
detect the fault status of the power failure.
*When the system is “ON” , the fault alarm is “off” .
*When the system is “OFF” , the fault alarm will “trigger” .
1 2 3 4 5 6
Load
5~24VDC
GND