ADW-4302v2 User Guide
Configuration Program
The ADW-4302v2 contains an HTTP server. This enables you to connect to it, and
configure it, using your Web Browser.
Your Browser must support JavaScript
.
The configuration program has been tested on the following browsers:
•
Netscape V4.08 or later
•
Netscape
7
•
Internet Explorer V5.01 or later
Preparation
Before attempting to configure the ADW-4302v2, please ensure that:
•
Your PC can establish a physical connection to the ADW-4302v2. The PC and the
ADW-4302v2 must be directly connected (using the Hub ports on the ADW-
4302v2) or on the same LAN segment.
•
The ADW-4302v2 must be installed and powered ON.
•
If the ADW-4302v2's default IP Address (192.168.0.1) is already used by another
device, the other device must be turned OFF until the ADW-4302v2 is allocated a
new IP Address during configuration.
Using your Web Browser
To establish a connection from your PC to the ADW-4302v2:
1. After installing the ADW-4302v2 in your LAN, start your PC. If your PC is already
running, restart it.
2. Start your WEB browser.
3. In
the
Address
box, enter "HTTP://" and the IP Address of the ADW-4302v2, as in
this example, which uses the ADW-4302v2's default IP Address:
HTTP://192.168.0.1
4. When prompted for the User name and Password, enter default user name
admin
and password
admin
.
10
Содержание ADSL 2/2+ VPN Firewall Router ADW-4302A v2
Страница 1: ...ADSL 2 2 VPN Firewall Router ADW 4302A v2 ADW 4302B v2 User s Manual...
Страница 4: ......
Страница 59: ...Operation and Status 53...