3.2 Configuration
In this screen, you can configure the wireless settings of WL-8317. After configuration,
please press ”Apply” to save settings or “Cancel” to set again.
SSID:
The SSID must be identical for each clients and nodes in the wireless network.
Wireless Mode:
Click pull-down button and select the work mode below.
¾
Ad-Hoc:
This mode indicates the peer-to-peer operation. All communication is done
from client to client without the use of an Access Point.
¾
Infrastructure:
This operation mode requires the presence of an Access Point. All
communication is done via the Access Point.
Ad-Hoc Band:
There are three options available for selection
¾
11B:
Allows user to set the 802.11b standard wireless network.
¾
11G:
Allows user to set the 802.11g standard wireless network.
Channel:
Shows the number of the radio channel used for the networking.
Tx Rate (11B/G):
Shows the Data Transfer Rate. If Auto Mode is selected, the device will
choose the best transfer rate automatically.
Power Mode:
Shows Power Management modes. There are two optional selections for
this mode.
¾
Continuous Access Mode:
WL-8317 will always set in active mode.
¾
Maximum Power Save:
WL-8317 will enter power saving mode when it is idle.
¾
Power Save:
WL-8317 consumes the moderate level of power.
Preamble:
There are two options can be selected: Short & Long Preamble, Long
Preamble. Preamble is a sequence of bits transmitted at 1Mbps that allows the PHY
9
Содержание 802.11g Wireless PCI Adapter WL-8317
Страница 1: ...802 11g Wireless PCI Adapter WL 8317 User Manual Version 1 00 Date November 2007 1 ...
Страница 10: ...6 ...
