Planet Networking & Communication wnap-7325 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 95

Planet Networking & Communication wnap-7325 Скачать руководство пользователя страница 10

User Manual of WNAP-7325/WNAP-7335

-9-

1.2 Product Description

PLANET WNAP-7325/WNAP-7335 Outdoor Wireless Access Point provides a higher transmission speed,
higher power and better performance designed for outdoor wireless application.

Faster Speed and longer Distance

Adopting the IEEE 802.11n advanced 2T2R MIMO technology, the WNAP-7325 and WNAP-7335 provide high
speed, reliable wireless network coverage, and incredible improvement in the wireless performance. As an IEEE
802.11a/n compliant wireless device, the WNAP-7325 and WNAP-7335 are able to give stable and efficient
wireless performance for long distance application. Thus, it delivers a data rate of up to 300Mbps three times
faster than the normal 802.11a wireless device. With its adjustable output power up to 500mW, it can extend the
coverage of an outdoor area.

Multiple Operation and Wireless Modes

The WNAP-7325 and WNAP-7335 support multiple wireless communication connectivities (AP, Client CPE,
WDS PtP, WDS PtMP and WISP), meeting user’s application requirements. It also helps user to easily extend
the existing wireless network.

Advanced Wireless Security

In aspect of security, besides 64/128- bit WEP encryption, the WNAP-7325 and WNAP-7335 are integrated with
WPA / WPA2, WPA-PSK / WPA2-PSK and 802.1x RADIUS authentication to secure and protect your wireless
LAN. The wireless MAC filtering and SSID broadcast help to consolidate the wireless network security and
prevent unauthorized wireless connection.

Perfect Solution for Outdoor Environment

The WNAP-7325 and WNAP-7335 are perfectly suitable to be installed in outdoor environments. With its IP55
casing protection, the WNAP-7325 and WNAP-7335 can perform normally under rigorous weather conditions
including heavy rain and wind.

With the passive Power over Ethernet (PoE) design, the WNAP-7325 and

WNAP-7335 can be easily installed in the areas where power outlets are not available. Thus, the WNAP-7325
and WNAP-7335 are ideal for outdoor wireless access applications between buildings on campuses, and in
business and rural areas.

Easy Installation and Management

With user-friendly Web UI and step by step Setup Wizard, user can set up a wireless network without any
difficulty.

«
...
8
9
10
11
12
...
»

Содержание wnap-7325
































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды