Planet Networking & Communication WGSW-2620P Скачать руководство пользователя страница 80

Страница: 80 / 131

1. Select

<Edit>

Radius Server IP:

set the Radius Server IP address.

Shared Key:

set an encryption key for using during authentication sessions with the specified

radius server. This key must match the encryption key used on the Radius Server.

NAS, Identifier:

set the identifier for the radius client.

Server Port:

set the UDP destination port for authentication requests to the specified Radius

Server.

Accounting Port:

set the UDP destination port for accounting requests to the specified Radius

Server.

7. Select

<Apply>

802.1x System Configuration interface

3.4.8.5.3 Per Port Setting

The State provides Disable, Accept, Reject and Authorize. Use “Space” key change the state value.

。

Reject:

the specified port is required to be held in the unauthorized state.

。

Accept:

the specified port is required to be held in the Authorized state.

。

Authorized:

the specified port is set to the Authorized or Unauthorized state in accordance with

the outcome of an authentication exchange between the Supplicant and the authentication server.

。

Disable:

The specified port is required to be held in the Authorized state.

Содержание WGSW-2620P




































































































































Результаты поиска

Содержание WGSW-2620P

Отзывы:

Бренды по названию

Популярные бренды

Planet Networking & Communication WGSW-2620P, Руководство пользователя

Результаты поиска

Содержание WGSW-2620P

Отзывы:

Бренды по названию

Популярные бренды