Planet Networking & Communication VIP-101T Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 47

background image

PLANET VIP-101T CLI configuration

- 21 -

a)

–

print

Parameter

–

print

is used to display H.323 stack information and configuration.

Syntax Description

This command has no arguments or keywords.

Default

This command has no default value.

b)

–

mode

VIP-101T is capable of running in Peer-to-Peer or GateKeeper mode. Machine default

usr/config$ h323
H.323 stack information and configuration
Usage:
h323 [-mode gkmode]
h323 [-gk ipaddress] [-algk ipaddress] [-gkdis used] [-e164 number] [-e164-x number]
          [-alias h323id] [-tokenpwd password]
          [-rtp port] [-ttl time] [-gkfind port] [-ras port]
          [-range [start num1] [end num2]] [-respto t1] [-connto t2] [-dfgw IP]
h323 -print
        -print          Display H.323 stack information and configuration.
        -mode            Configure as Gatekeeper mode or Non-GateKeeper mode.
        -gk                Gatekeeper ip address. (0.0.0.0 ~ 255.255.255.255)
        -dfgw            Default Gateway IP Address. (0.0.0.0 ~ 255.255.255.255)
        -algk            Second Gatekeeper ip address. (0.0.0.0 ~ 255.255.255.255)
        -gkname        Gatekeeper ID
        -e164            IP side registered number.
        -e164-x        IP side registered number.(x:1~9)
        -alias          IP side registered H323 ID.
        -tokenpwd    RRQ/ARQ authentication token password.
        -gkdis          Gatekeeper auto discovery (multicast, On=1, Off=0).
        -rtp              RTP port number (1024~65532).
        -ttl              RAS TTL time (0~3600 second).
        -gkfind        Gatekeeper finding port (1024~65535).
        -ras              Gatekeeper RAS port (1024~65535).
        -range          Dynamically allocated port range (1024~65535).
        -respto        Max waiting time for 1st response to a new call (1~200).
        -connto        Max waiting time for call establishment after receiving 1st
                              response of a new call (1~20000).
Note:
Options -gk -e164 -alias -gkdis -ttl -gkfind -ras are ignored when
        RAS mode is configured as Non-GK mode.
Example:
        h323 -gk 210.59.163.171 -e164 101 -alias vip-100t
        h323 -mode 1

«
...
25
26
27
28
29
...
»

Содержание VIP-101T
















































Отзывы:

Нет отзывов

Похожие инструкции для VIP-101T

Бренд: KARBONN Страницы: 18

Бренд: KARBONN Страницы: 12

Бренд: Kantronics Страницы: 260

Бренд: Xblue Networks Страницы: 98

VOIP-500 Series

Бренд: Talkaphone Страницы: 4

VOIP-600 Series

Бренд: Talk-a-Phone Страницы: 6

VOIP-500 Series

Бренд: Talkaphone Страницы: 6

Бренд: TAG Heuer Страницы: 49

Бренд: Polycom Страницы: 4

Бренд: jablotron Страницы: 7

Бренд: Fysic Страницы: 60

Бренд: Sony Ericsson Страницы: 208

One Touch Spop 4030D

Бренд: Alcatel Страницы: 73

Digital Mova SO503iS HYPER

Бренд: Docomo Страницы: 396

Бренд: Alcatel Страницы: 61

Бренд: SSS Siedle Страницы: 14

Бренд: Blu Страницы: 31

Бренд: Doro Страницы: 62

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды