6 IP PBX Configuration
This section introduces steps to provision the IP telephony part of the IP PBX. Note that reloading
configuration is required in order to make new configuration effective
.
6.1 User Group Configuration
A usergroup is a logically grouping of users and their privileges. For instance, one could have couple of
usergroups in an IP telephony network, e.g. Sales, Marketing, Administration, Accounting, and
Engineering, etc. Each usergroup associates with a set of PBX features and call routing scopes. In
other words, all users in the same usergroup share the same reachability of PBX features and final
destinations.
Select
User Management
->
User Group
, and one can add, edit, delete or search usergroups. Go to
Service
->
IP PBX Service
, and click
Reload
to activate changes.
Note:
The maximum usergroup is 64 for PC#1 and 32 is for PC#2.
6.1.1
Add a User Group
1.
Enter a usergroup name beside the
Add
button, and then click
Add
.
2.
The name will show in
Group ID
.
3.
Click the name in
Group ID
to view the edit page.
4.
Enter settings shown in
.
5. Click
Back
to return to the
Usergroup Management
page.
Now, you can see the newly added usergroup displayed in the
Group ID
.
6.1.2
Edit a User Group
1.
Click a usergroup name in the
Group ID
.
2.
Edit settings shown in
.
3. Click
Back
to see the updated information.
6.1.3
Delete a User Group
1. Select
a
Group ID
.
2. Click
Delete
to remove the usergroup from the
Group ID
.
17
Please refer to 5.6.1.1 for details.
41
