-
59
-
Click “Save” to confirm the setting
.
4.5 PTZ Settings
Under the “PTZ” category, users are allowed to program Preset Point(s), Cruise Line(s), Auto Pan
Path(s) and Sequence Line(s) via PTZ controls. Additionally, various camera settings including Auto
Exposure (AE), White Balance (WB), Back Light Compensation (BLC), Sharpness, Exposure
Compensation, Digital Zoom, etc. also can be set here.
4.5.1 Preset
Totally 256 Preset Points can be programmed for the Speed Dome IP Camera. Please refer to the
instructions below to set a Preset Point.
Preset Setting
To setup a Preset Point, please first move the cursor to the live view pane. Then left click and drag the
red pointer with PTZ controls to a desired position. Subsequently, assign a number for the current
position from the drop-down Number List, and enter its descriptive name. Press the button “Set” to save
the settings mentioned above.
Preset Go
To have the camera move to a specified Preset position, please select the Preset Point from the
drop-down Presetlist. Then the camera shall readily move to the target position.
4.5.2 Cruise
The Speed Dome IP Camera supports up to eight Cruise Paths. Please follow the instructions below for
Cruise Path setup.
