1080p IR Bullet PoE IP Camera
ICA-3250
- 47 -
Appendix A: Ping IP Address
The ping (or Packet Internet Groper) command is used to detect whether a specific IP address
is accessible by sending a packet to the specific address and waiting for a reply. It’s also a very
useful tool to confirm whether Internet camera is installed or not, or if the IP address conflicts
with any other device over the network.
If you want to make sure the IP address of the camera, utilize the ping command as follows:
Start a DOS Window.
Type ping x.x.x.x, where x.x.x.x is the IP address of the camera.
The replies, as illustrated below, will provide an explanation to the problem.
If you want to detect any other device conflicting with the IP address of the camera, you also
can utilize the ping command but you must disconnect the camera from the network first.
