- 9 -
- 10 -
- 11 -
- 12 -
- 13 -
- 14 -
Step 4:
Connect your Gigabit Ethernet Switch to network
devices.
A.
Connect one end of a standard network cable
to the 10/100/1000BASE-T RJ45 ports on the
front of the Gigabit Ethernet Switch.
B.
Connect the other end of the cable to the
network devices such as printer servers,
workstations or routers, etc.
Step 5:
Supply power to the Gigabit Ethernet Switch.
A.
Connect one end of the power cable to the
Gigabit Ethernet Switch.
B.
Connect the power plug of the power cable to
a standard wall outlet.
When the Gigabit Ethernet Switch receives power, the
Power LED should remain solid Green.
Caution:
You must use the screws supplied with the mounting
brackets. Damage caused to the parts by using incorrect
screws would invalidate your warranty.
Step 3:
Secure the brackets tightly.
Step 4:
Follow the same steps to attach the second
bracket to the opposite side.
Step 5:
After the brackets are attached to the Gigabit
Ethernet Switch, use suitable screws to securely
attach the brackets to the rack, as shown in
Figure 6.
9
11
13
15
1
3
5
7
10
12
14
16
17
19
21
23
18
20
22
24
4
6
8
2
GSW-2401
24-Port Gigabit Ethernet Switch
2
PWR
4 6 8 10
12 14
18
LNK/ACT
1000
1 3 5 7
11
9
13
17
16
15
20
19
22
21
24
23
LNK/ACT
1000
ACT
LNK
1000
10/100
Figure 6:
Mounting the Gigabit Ethernet Switch in a Rack
Step 6:
Proceed with Steps 4 and 5 of Desktop Installation
to connect the network cabling and supply power
to your Gigabit Ethernet Switch.
Rack Mounting
To install the Gigabit Ethernet Switch in a 19-inch standard
rack, follow the instructions described below:
Step 1:
Place your Gigabit Ethernet Switch on a hard flat
surface, with the front panel positioned towards
your front side.
Step 2:
Attach a rack-mount bracket to each side of the
Switch with supplied screws attached to the
package. Figure 5 shows how to attach brackets to
one side of the Gigabit Ethernet Switch.
9
11
13
15
1
3
5
7
10
12
14
16
17
19
21
23
18
20
22
24
4
6
8
2
GSW-2401
24-Port Gigabit Ethernet Switch
2
PWR
4 6 8 10
12 14
18
LNK/ACT
1000
1 3 5 7
11
9
13
17
16
15
20
19
22
21
24
23
LNK/ACT
1000
ACT
LNK
1000
10/100
Figure 5:
Attaching the brackets to the Gigabit Ethernet Switch
Customer Support
Thank you for purchasing PLANET products. You can browse
our online FAQ resource on PLANET Web site first to check
if it could solve your issue. If you need more support
information, please contact PLANET switch support team.
PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address:
[email protected]
Copyright © PLANET Technology Corp. 2016
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.
EC Declaration of Conformity
For the following equipment:
*Type of Product : 16/24 -Port 10/100/1000T Gigabit Ethernet Switch
*Model Number
: GSW-1601, GSW-2401
* Produced by:
Manufacturer‘s Name :
Planet Technology Corp.
Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan (R.O.C.).
is herewith confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States relating to Electromagnetic Compatibility
Directive on 2014/30/EU; Low Voltage Directive 2014/35/EU.
For the evaluation regarding the EMC, the following standards were applied:
EN 55022
(2010 / AC:2011)
EN 61000-3-2 (2014)
EN 61000-3-3
(2013)
EN 55024
(2010)
IEC 61000-4-2 (2008)
IEC 61000-4-3 (2006+A1:2007+A2:2010)
IEC 61000-4-4 (2012)
IEC 61000-4-5
(2014)
IEC 61000-4-6
(2013)
IEC 61000-4-8
(2009)
IEC 61000-4-11 (2004)
EN 60950-1
(2006+A11:2009+A1:2010+A12:2011+A2: 2013)
Responsible for marking this declaration if the:
Manufacturer
Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name:
Planet Technology Corp.
Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan
(R.O.C.)
Person responsible for making this declaration
Name, Surname
Kent Kang
Position / Title :
Director
Taiwan
7 Oct., 2016
Place
Date
Legal Signature
PLANET TECHNOLOGY CORPORATION
e-mail: [email protected] http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528
