Planet Networking & Communication FNSW-1601, Инструкция по эксплуатации

Страница: 10 / 22

- 6 -
2.3 The Rear Panel
AC inlet
Figure 3: Rear View for the Switch
2.3.1 Power Connector
The Power Connector is designed to be used with the power
cord included in the product package. Attach the female end
of the cord to the power connector and the male end of the
cord to a grounded power outlet. The accepted power range
is from 100VAC to 240VAC, 50/60Hz.
Note:
The Switch is a power-required device, it means, the
Switch will not work until it is powered. If your networked
PCs will need to transmit data all the time, please consider
use an UPS (Uninterrupted Power Supply) for your
Switch. It will prevent you from network data loss.
In some area, installing a surge suppression device may
also help to protect your Switch from being damaged by
unregulated surge or current to the Switch or the power
adapter