Planet Networking & Communication DVR-462 Скачать руководство пользователя страница 3

Страница: 3 / 89

Energy Saving Note of the Device

This power required device does not support Stand by mode operation.

For energy saving, please remove the DC-plug or push the hardware Power Switch to OFF

position to disconnect the device from the power circuit.

Without remove the DC-plug or switch off the device, the device will still consuming power

from the power circuit. In the view of Saving the Energy and reduce the unnecessary power

consuming, it is strongly suggested to switch off or remove the DC-plug for the device if this

device is not intended to be active.

Trademarks

The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous

hardware and software products by their trade names. In most, if not all cases, these designations are

claimed as trademarks or registered trademarks by their respective companies.

Revision

User’s Manual for PLANET 4-Ch H.264 Digital Video Recorder

Model: DVR-462

Rev: 2.0 (June, 2011)

Part No. EM-DVR462

Содержание DVR-462


























































































Результаты поиска

Содержание DVR-462

Отзывы:

Planet Networking & Communication DVR-462, Руководство пользователя, Страница: 3 / 89

Результаты поиска

Содержание DVR-462

Отзывы: