II
Safety Instructions
1. Please disconnect this equipment from AC outlet before cleaning. Don’t use
liquid or sprayed detergent for cleaning. Use moisture sheet or clothe for
cleaning.
2. For pluggable equipment, the socked-outlet shall be installed near the
equipment and shall be easily accessible.
3. Please keep this equipment from humidity.
4. Lay this equipment on a reliable surface when install. A drop or fall could cause
injury.
5. Do not leave this equipment in an environment unconditioned, storage
temperature above 60
0
C, it may damage the equipment.
6. The opening on the enclosure is for air convection hence the equipment from
overheating. DO NOT COVER THE OPENING.
7. Make sure the voltage of the power source connect the equipment to the power
outlet.
8. Please keep the power cord such a way that people can not step on it. Do not
place anything over power cord. The power cord must rate for the voltage and
current marked on the product’s electrical ratings label. The voltage and current
rating of the cord should be greater than the voltage and the current rating
marked on the product.
9. All cautions and warning on the equipment should be noted.
10. If the equipment is not in use for long time, disconnect the equipment from mains
to avoid being damaged by transient over-voltage.
11. Never pour any liquid into ventilation openings; this could cause fire or electrical
shock.
12. Never open the equipment. For safety reason, qualified service personnel
should only open the equipment.
13. If one of the following situations arises, get the equipment checked by service
personnel.
The Power Cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment has not worked well or you can not get it work according to
User’s Manual.
The equipment has dropped and damaged.
If the equipment has obvious signs or breakage.
