- 46 -
4.3 Authenticator Setup
1. For
EAP-MD5
Authentication, WEP key must be set previously. Go to
Wireless>Authentication.
Enable WEP key, and enter a desired key string. You can skip this step if using
EAP-TLS
Authentication.
2. Click on
802.1X
for detailed configuration.
3. Enable 802.1X Authentication by selecting
“
Enable
”
.
4. If
EAP-MD5
is used, you can leave the settings in
Encryption Key Length
and
Lifetime
as default. If
you are using
EAP-TLS
authentication, set the
Encryption Key Length
ranging from 64 to 256 Bits and
the
Lifetime
from 5 Minutes to 1 Day. As soon as the lifetime expires, the Encryption Key will be renewed
by RADIUS server.
5. Enter the
IP address, Port number, and Shared Secret Key
used by the
Primary
Radius Server.