12/1/2006
9
DRIVE/FREEWHEEL OPERATION
The drive/freewheel lever (red handle) is located under the seat at the right rear of unit.
This lever allows you to disengage the drive mechanism and push the scooter while in
freewheel mode. To disengage the drive mechanism (neutral), move the lever forward (the
scooter can now be pushed). To re-engage the drive mechanism (drive), move the lever
backward (now the unit may be driven).
Note: The scooter will not operate while the drive/freewheel lever is in the neutral position
(forward). The scooter must be turned off, lever moved backward (drive position) and then
turned on in order to reset the circuits.
WARNING! Always re-engage the free wheeling device after use. Failure to do so
may result in injury.
Anti-tip wheels
The anti-tip wheels are located at the rear of the scooter frame. The scooter should not be
used unless the anti-tipping wheels are in place.
Planet Mobility
is not responsible for damage or injury incurred due to improper or
misuse of the scooter.
Scooter serial number
The scooter serial number is alphanumeric and is located on between the anti-tip wheels
on the rear frame and consists of a combination of 13
No#
and letters.
Planet Mobility
recommends that you write the serial number down on the back of this manual for future
reference.
~
