Planet Audio P9754, Руководство пользователя

Страница: 2 / 22

00
2
Contents
1
Before You Start
Important Safeguards 4
About this manual 4
Precautions 5
Maintenance 6
Location & function of the controls 7
Remote control 9
Specifications 11
1
Common Operations
3
To Select Source by Menu
18
Reset the Unit
18
Turning the Unit On/Off
18
Volume Control
18
Setting the Sound Characteristics
18
EQ Setting
19
Turning Loudness On/Off
19
Insert a SD Card
19
Eject a Disc
19
Mute Function
19
Mode Selector
19
Infrared Sensor
19
5
Main Menu
Main Menu Setup 20
Video Adjust 20
Audio Adjust 20
Source Setup 21
System Adjust 21
4
DVD/VCD/MP4
5
5
DVD/VCD/MP4 Setup 25
DVD/VCD/MP4 Play 25
Selecting Tracks Fast 25
Number Buttons 25
Pause the Playback 25
Stop the Playback 25
Play tracks at Random 26
Repeat Playing 26
Skip backward/forward/
26
System Switch 26
Slow Motion Playback 26
Increase Picture Size 26
On Screen Display 26
Setting the Playback Time 27
Changing Audio Language 27
Changing the Subtitle Language 27
Changing the Viewing Angle 28
Selecting Channel 28
Program Playing 28
Playing PBC(Menu) 28
Selecting Menu 29
DVD Setup Menu 29
F.F/F.REW the
Playback
Additional Information
09
Installation
Wiring Connections 12
Install the Unit 13
Detach the Unit 15
Install the Front Panel 16
Detach the Front Panel 16
clean the connector 17
2
43
Common Symptoms
Cause Solution
There is no power.
The car ignition is
switched off
If the power supply is properly connected to
the car accessory, switch the ignition key to
ON or ACC.
The fuse has blown.
Replace with same amperatge fuse rate.
The disc cannot
be loaded.
There is another disc inside
the player
Remove the disc from the player
The device does not
work correctly
(EJECT, LOAD,
PLAY)
Inserted disc is upside down
Insert the compact disc with the label facing
upward
The surface of disc is extre-
mely dirty, Scrached or
damaged.
Clean the disc or try another disc,if the new
disc
works correctly, the first disc is damaged.
Temperature inside the car is
too
high.
Cool off until the ambient temperature returns
to normal.
There is no sound.
The volume control is set too
low.
Turn up the volume properly.
The device has not been wired
correctly.
Check the connections according to
the wiring diagram.
The operation keys
do not work
1. The built-in microprocessor
is not operating properly.
2. Front panel is not properly
attached into its place
1. Switch the device off and on again or press
the RESET button.
2. Remove and reinstall the front panel.
The sound of the
disc player skips
The installation angle is more
than30 degrees
The surface of the road is
uneven.
The surface of disc is extremely
dirty,scrached or damaged.
Adjust the installation angle to less than 30
degrees
Wait until the road becomes smoother before
playing the disc.
Clean the disc or try another disc, if the new
disc works correctly, the first disc is damaged.
No radio reception.
The antenna cable is not
connected.
Insert the antenna cable firmly into the antenna
socket of the unit.
In automatic search
mode the radio does
not stop at a trans-
mitting station.
The transmission signals are
too weak.
Tune in to a radio station manually.