DESCRIPTION OF BUTTONS ON REMOTE CONTROL
1. POWER button
2. AP button
3. SCN(SCAN) button
4. CLK button
5. MODE button
6. BND(BAND) button
7. Number(0~9) buttons
8. * button
9. MUTE button
10. T-M button
11. TEL button
12. CLEAR button
13. # button
14. PTY button
15. TA button
16. AF button
17. >>| and |<< buttons
18. SEL button
19. + and - buttons
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
*
MUTE
MODE
TOP
SCN
AP
5
1
9
0
#
T-M
CLEAR
6
7
INT
2
BND
RPT
3
PTY
8
RDM
4
TA
CLK
SELECT
+
AF
POWER
INSTALLATION METHOD
This is an anti-theft installation method.
The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power supply, the Speakers and the Antenna
according to the requirements of this Instruction Manual, then install the metal mounting
sleeve into the car as per the diagram illustrated below.
METAL
SUPPORT STRAP
To raise the anti-skip capability of the unit,
please ensure the metal support strap is
connected firmly to the car chassis.
To properly fix the metal mounting
sleeve, bend the tabs of the sleeve
against the DASH BOARD with a
screwdriver.
DASHBOARD
METAL MOUNTING SLEEVE
UNIT CHASSIS
PLASTIC TRIM RING
FRONT PANEL
To remove the CD player out of the mounting sleeve,
insert the two supplied keys into the left and right side
slots of the chassis at the same time.
To attach the removable faceplate, insert the
right side of the faceplate into the right of the
CD player chassis first. Then push the left side
of the faceplate into the chassis until you hear
it “click”.
Remove the two screws that protect
the CD player during transportation
before operating the player.
Before installing and operating
the CD player, remove the metal
mounting sleeve illustrated by
the arrows.
NOTE
METAL
SUPPORT STRAP
6. To transfer the audio of a file played by Mobile Phone to the Car Audio Player
If the mobile phone supports A2DP and could play audio or video files, when the
Mobile Phone plays an audio (For some Mobile Phones, you must select Play
by BT firstly), the playing will be transferred to the Car Audio Player.
In A2DP mode, the functions of the >>|, |<< and PLAY/PAUSE /MUTE buttons
are the same as one in disc mode(no fast forward /backward functions for the
>>|/|<< buttons). The other buttons available in disc mode are not available.
In A2DP mode, pressing the MODE button can switch on between the radio,
disc, USB, CARD and A2DP. But after entered the A2DP mode again, it will
resume play back after you press the PLAY/PAUSE button.
