Planar VM55LX-U, Руководство пользователя

Страница: 17 / 37

General
VM Series Displays RS232 User Guide
020-1359-00A
Page | 17
10.3 Power State at Cold Start Set
Bytes Bytes Description Bits Description
DATA[0]
0xA3 = Power State at Cold
Start- Set
Set Power State at Cold Start
DATA[1] Power State at Cold Start
0x00 = Power Off
0x01 = Forced On
0x02 = Last Status
The value is stored and applied only when the display starts up from cold start power state the
next time:

Power Off: The monitor will automatically switch to Power Off mode (even if the last
status was on) whenever the main power turns on, or resumes after a power interruption.

Forced On: The monitor will automatically switch to Power On mode whenever the main
power turns on or resumes after a power interruption.

Last Status: The monitor will be automatically switch to the last status (either Power Off
or On) whenever the main power turns on or resumes after a power interruption.
Example: Report status of Forced On for Power State at Cold Start (Display Address 01)
Header Monitor ID Category Page Length Data Control Data[0] Data[1] Checksum
0x21 0x01 0x00 0x00 0x04 0x01 0xA4 0x01 0x80