background image

 

vi

 

Product Information

 

Safety 
instructions

 

Store the display in its original shipping carton when it is not in 
operation for extended periods of time. Also use the original packing 
materials and carton when shipping the display.

 

 

Do not place the display near a window. Exposing the display to rain, 

water, moisture, or direct sunlight can damage it.

 

 

Do not place anything on top of the video cable. Make sure 

the cable is placed where it will not be stepped on.

 

 

Do not apply excessive pressure to the screen. Excessive 

pressure may cause permanent damage to the display.

 

 

Refer all servicing to qualified personnel to maintain your 

warranty. The display and power adapter units contain no 

user-serviceable parts.

 

 

Do not cover or obstruct the venting holes on the back of 

the display.

 

 

Store the display in an environment with a temperature range 

from -20 to 65 degrees Celsius. Storing your display outside that 

temperature range could result in permanent damage.

 

 

Do not expose the display to liquid or drop it. If the case has been 

damaged, the unit may pose a shock or fire hazard. Unplug the unit 

immediately and call customer service for assistance.

 

 

Replace any cord or cable that is frayed or damaged with another 

of the same type and rating, as supplied by Planar. The safety and 

regulatory listings and certifications are based on the cable supplied 

by Planar.

 

 

Use only the power adapter that has been tested and approved for 

use with this display product. The power adapter must be plugged 

into a grounded power outlet.

 

 

Do not immerse the power adapter in liquid, or a safety hazard could 

arise during use.

 

 

Do not use the power adapter near inflammable anesthetics.

Содержание VitalScreen S VSS15X





































Отзывы: