6
First Setup
Installing the Stand Base
1.
Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the LED
LCD Monitor from being scratched, put a piece of soft cloth on the table on which the screen
will be set.
2.
Insert Stand and Base into the monitor as shown below.
3.
Use a screwdriver to fully tighten the two screws to the top of the stand.
4.
Stand the LED LCD Monitor up.
Disconnecting the Stand Base
1.
Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the LED
LCD Monitor from being scratched, put a piece of soft cloth on the table on which the screen
will be set.
2.
Use a screwdriver to loosen the two screws at the top of the stand.
3.
Push release button and pull stand away from monitor.
4.
Press the tenons inwardly and pull the base from stand to remove.
