Environmental Conditions for Installation
PS5580 Installation Guide
4
Environmental Conditions for Installation
• Since the PS5580 panel is very sensitive to physical impact, installation requires
considerable caution
• Minimum clearance (20 mm) must be observed—top, bottom, and both
sides—for proper ventilation. Installation must avoid air-tight or nearly air-tight
places. Improper ventilation causes malfunction and shortens product life by a
rapid internal temperature rise. If the PS5580 must be installed with improper
ventilation, additional ventilation openings or fans must be provided to keep
the internal temperature between 0°-35°C (32°-95°F).
• For grounding the PS5580 and attached devices, it should be connected as a
frame ground.
• Considering the PS5580 max power consumption, check the main electrical
specification.
• Regularly clean the vent holes in the back of the PS5580 to prevent
overheating.
Recommended Operating Conditions
• Temperature: 5-35°C (41-95°F)
• Humidity 35-75%
• Do not install the set it an air-tight condition; provide adequate ventilation.
• Do not install the set in a place of direct sunlight or excessive exposure to lights.
WARNING
Blackening, stains or burning effect on the screen may occur through
improper installation or use outside these recommended conditions.
