background image

 

 

16

P

REFACE

 

FCC Compliance Statement 

This device complies with part 15 of the FCC Rules. Operation is subjected to 
the following two conditions: 

1.  This device may not cause harmful interference, and 
2.  This device must accept any interference received, including interference 

that may cause undesired operation. 

FCC WARNING 

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential 
installation. 

This equipment generates, uses and can radiate radio frequency energy and, if 
not installed and used in accordance with the instructions, may cause harmful 
inerference to radio communications. 

However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or more of the 
following measures: 

• 

Reorient or relocate the receiving antenna. 

• 

Increase the separation between the equipment and the receiver. 

• 

Connect the equipment into an outlet different from that to which the 
receiver is connected. 

• 

Consult the dealer or an experienced radio/TV technician for help. 

 

 

 

 

 

 

Содержание PE150M























Отзывы: