Planar PD7170, Инструкция по установке и эксплуатации

Страница: 94 / 100

Specifications
80 Planar PD7170 Installation/Operation Manual
PREL
IMINA
RY
Performance
Microdisplay: Texas Instruments DLP® 1280x720 DMD (x 3)
Native Resolution: 1280 x 720 (921,600 pixels)
Aspect Ratios: Native (Pixel-to-Pixel), 16:9, Letterbox, 4:3,
4:3 Narrow, Letterbox (Anamorphic lens
compatible)
Projection Lens (Standard): F/3.5, 25.5~32.0mm focal length
Throw Ratios: Refer to Table 3-3
Vertical Lens Shift Range: Up to 65% of screen height above or below lens
center (130% of one half of the screen height)
Horizontal Lens Shift Range: Up to 30% of screen width left or right of lens
center (60% of one half of the screen width)
Video Lumens: 2,000 ANSI lumens (average) calibrated at D65
Sequential Contrast –
DynamicBlack On: 20,000:1 typical
Cooling Performance: High efficiency adaptive voltage side-to-side
cooling with low system acoustic noise level and
low light pollution cabinet
Projection Modes: Front, Rear, Ceiling (front/rear)
Lamp: User replaceable, 230/260W HPM (selectable),
2500 hour lifetime at 230W setting
Video Processing: Planar customized Gennum GF9450 with 10 bit
independent dual channel image processing,
true 1080i deinterlacing, MPEG artifact reduction
(block and mosquito noise), latest motion
adaptive processing, 3D noise reduction, detail
enhancement, rich color processing and noise
reduction, less than one frame latency
Calibration: Full RGB gain/offset control (White Balance),
Gamma, Contrast, Color Temperature, Brightness
Table 7-1. PD7170 Specifications (continued)