Planar PD4010, Руководство пользователя

Страница: 8 / 152

8
S
TARTING AND
S
HUTTING DOWN THE
P
ROJECTOR
1.
Remove the lens cover.
2.
Connect the power cord to the projector.
Connect the other end to a wall outlet.
3.
Press the Power button. The Power LED
on the projector turns on. Turn on the con-
nected devices.
4.
The language selection screen appears
(Initial setup only). Select the desired lan-
guage.
1. Press the cursor ST button until
Language is highlighted.
2. Press the cursor W X or Menu but-
ton to con fi rm the language, and
close the OSD.
5.
If more than one input device is connect-
ed, press the source bottom to search.
6.
Press the Power button to turn off the
projector. The Powering Down screen
appears.
Note: Pressing the Power button again
within fi ve (5) seconds cancels powering
down the projector.
7.
When the Power LED stops fl ashing, the
projector goes on standby mode.
Do not unplug the power cord until the Ready LED stops
fl ashing, indicating the projector has cooled down.