Connecting the Matrix Video Extender Box
4
5
Plug one end of the data cable into the LCD1 VIDEO connector of the
Quad controller module.
6
Plug the other end of the data cable into LCD 1 on the INPUT side of the
extender box. If the Quad controller module is powered on and the
extender box is on, the green LED should light.
7
Take the second data cable and plug it into LCD 1 of the OUTPUT side of
the extender box.
8
Plug the other side of the data cable into the VIDEO connector of LCD 1.
9
Depending on the cable length that is running between the extender box
and the LCD, you might see vertical lines or noise on the LCD. If you do,
you will need to adjust the EQ on the extender box, as well as on the LCD
itself through the on-screen menus.
LCD
