background image

Advanced Options

m70L Installation & Configuration Guide

61

2

Use the up/down arrows to select the Frequency line. Use the -/+ keys to scroll 
through the list until you find the selection you want. The following frequencies 
can be selected:

• One Time (e.g. to set clock ahead one hour in the spring)

• Daily (e.g. to turn the unit on/off )

• Weekly

Note: 

If you have set up a one time event, the frequency will show “Never” once the event 

has occurred. You can schedule the event to occur again by changing the frequency back to 
“One Time” and then correcting the date and time.

3

Use the up/down arrows to select the Action line. Use the -/+ keys to scroll 
through the list of Action items until you find the one you want. The following 
actions can be selected:

• Turn Unit Off

• Turn Unit On

• Recall  Slot

• Set Clock Ahead 1 Hour

• Set Clock Back 1 Hour

4

Do one of the following:

• If you selected “Recall Slot” in the previous step and want to recall a memory 

slot other than the one shown, go to 5.

• If you did 

not

 select “Recall Slot” in the previous step, go to 6.

E v e n t   #   ( 0 =   s e t   c l o c k )

1

F r e q u e n c y

D a i l y

A c t i o n

N o   A c t i o n

S l o t   t o   R e c a l l

1

D a y   o f   We e k

We d n e s d a y

Ye a r

2 0 0 7

M o n t h

0 2

D a t e   i n  M o n t h

2 8

H o u r

0

M i n u t e

0

Содержание m70L













































































































Отзывы: