Quick Installation
1.
Connect either HDMI or Display Port Video source from the monitor to the computer, using
the included HDMI cable or Display Port cable. Make sure both monitor and computer are
powered OFF.
2.
Connect the earphone to the earphone output terminal of the monitor. (Earphone may be
sourced separately from an earphone supplier)
3.
Connect power cord to a properly grounded AC outlet, and then to the monitor.
4.
Power-ON computer and then POWER-ON the monitor.
5.
Set the timing mode on your computer. Recommended resolution and refresh rate is 5120 x
2880 @ 60Hz.
Note:
HDMI input does not support 5120 x 2880 resolution. It is only supported on Display Port input, using a single
Display Port cable. Check your hardware, operating system, content and graphics card for compatibility.
Earphone
(not supplied)
Figure 1:
PC
Power cable
Display Port
cable
HDMI
cable
8
