24
4.4.4.5
Scanning Channel Data Logger Page
To start scanning the selected Channel Data Logger page (Section
Ошибка! Источник ссылки не
найден.
), press the
«F2/Start»
. A table for preparing scan data (Figure 4.12) will appear on the
screen where you can tune
the measurement parameters and scan speed. Press
«F1/Ok»
to
confirm the start. The scan progress table will appear on the screen. After the scan is complete,
you can save the results and go to the data view mode.
4.4.4.6
Deleting Channel Data Logger Page
To delete the selected Channel Data Logger page, press
«F1/Page»
and select
Delete
. A
confirmation dialog will appear on the screen. You can cancel or confirm page deletion.
4.5
General Settings
The General Settings mode is designed to set the modes of the analyzer's overall operation. To
start the mode in the main selection menu, select the icon set
and using
« »
and
« »
set
the icon in the bottom row of the screen. Use
«F1/Config»
to start the mode (Figure 4.18).
Figure 4.18
The table contains 7 parameters for selecting the operating mode:
Language
Selecting a Graphical user interface language.
Color theme
Selecting a color set of the graphical interface.
Key sound
Key sound indication control.
Auto Power Off
Setting Analyzer automatic switch-off. Power off after the last button
press.
Auto light off
Setting automatic backlight switch-off mode.
Содержание IT-19C
Страница 1: ...IT 19C QAM SIGNAL ANALYZER OPERATING MANUAL...
Страница 2: ...2 Revision 1 0 of 06 2019...