Planar IT-19C, Руководство по эксплуатации

Страница: 16 / 32

16
Figure 4.8
The table contains the channel number, channel name, channel frequency and type (analog or
digital). For general information about the channel plan, press
«F2/Info» .
To edit the channel, press «F1/Channel» . The pop-up menu shows the possible commands with
the channel:
1) New . Adding a channel;
2) Edit. Editing channel parameters;
3) Delete. Deleting a channel.
In channel editing mode, a table with parameters will appear on the screen. The screen view is
shown in the Figure 4.9:
Figure 4.9
The editing table contains 7 parameters for an analog channel:
1) Type. Channel type: analog .
2) Number. Channel number.
3) Frequency . Video carrier frequency.
4) Name. Channel name. It can be edited in ViewIt19C.
5) Standard. The parameter determines the channel bandwidth.
6) System . It determines the channel color system.