QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Display
Package Contents
Identify Components
Position Display
Desk Stand Features
INSTALLING THE DISPLAY
Set DIP Switch
Install Display Controller
Connect Video and Power
Install Display Driver
Change Display Properties
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
LED Status Lights
Single Desktop
USB Connection
Component Removal
Power Management
Palette Options
23
Dome C5i Display
To restore the configuration dual display mode
1
Uninstall any existing DX/DX2 display driver. See “To uninstall the driver” on
page 26
.
2
On the DIP switch, place switch 3 in the OFF position. (See
page 7
.)
3
Reinstall the display controller. (See
page 8
.) Then attach both displays to
the controller. (See
page 9
.)
4
Power on the system, and run Setup.exe to install the driver. (See
page 10
.)
5
Set the display resolution. (See
page 11
).
Example for Dome CX:
the single desktop in portrait mode
resolution 3072 x 2048 for
On the Dome tab, select
Safety precaution
Wear an antistatic wrist strap when
handling the board and display to
prevent electrostatic discharge.
