29
Dome Q2 Display
QUICK LINKS
GETTING STARTED
INSTALLING THE DISPLAY
OPERATING THE DISPLAY
APPENDIXES
Controller Specification
Parameter
Description
Operating environment
Windows XP, Windows 2000
System requirements
Intel Pentium 3, Pentium 4, Xeon;
AMD Athlon XP/MP/Opteron or compatible
Certifications
FCC/DOC, ICES-003, CE/DOC, SMA C-Tick, MIC, BSMI, VCCI
Dimensions
Length: 228.6 mm (9.0 inches)
Width: 108.0 mm (4.25 inches)
Power requirements
+ 3.3 Volts DC: 9.4 Amps
+ 5 Volts DC: 0.6 Amps
+ 12 Volts DC: 2.0 Amps maximum
Bus system
AGP 3.0, AGP Pro 50 connector
Video memory
DDR, SDRAM, unified frame buffer, Z-buffer, texture storage
256-bit memory interface
BIOS
64 Kbyte BIOS Flash ROM, reprogrammable by software, 3.3 V
Digital/analog converter
2x 30-bit palette DAC
DAC speed: 400 Mhz
Data width
256 bit - graphics core
256-bit memory interface
Connectors
2x DVI-I output connectors: analog and digital output, female
H/V sync output signals
Separate horizontal and vertical sync at TTl levels
Card addresses
The display controller is 100 percent IBM VGA-compatible and occupies the
same memory area and specific addresses in the I/O range. the memory
range above 1 MB is automatically assigned through the PCI BIOS interface.
I/O addresses: 3B0–3DF (Standard VGA I/O)
Video RAM: A000–BFFF
Video ROM: C000-C7FF