13
Dome Q2 Display
QUICK LINKS
GETTING STARTED
INSTALLING THE DISPLAY
OPERATING THE DISPLAY
APPENDIXES
Connect the Cables
Use only the cables and power cord supplied with the Q2 display.
1
Press the
on the desk stand and remove the stand cover.
2
Plug one end of the video signal cable to the DVI port on the display.
Tighten the thumbscrews to secure the connection.
3
Plug the power cord into the power connector on the interface plate.
4
Plug the other end of the DVI cable into the video port on the installed
if you are installing only one display.
5
Plug the other end of the power cord into a grounded outlet.
6
Reattach the stand cover.
7
Power on your display first, then the computer.
Installation tips
Easy access to ports
For displays mounted on a desk
stand, rotate the screen from
landscape to portrait for easy access
to the ports. If you need to place
your display face down, lower it
carefully on a protective cloth to
protect the screen.
Threading cables
Thread the cables and power cord
through the back of the stand. Make
sure the cables run through the
notches. To reattach the stand cover
correctly, align the hooks with the
slots on the stand. Press the cover
into place. A click sound signals
a secure connection.
Restarting
Turn on your display before you turn
on your computer. Failing to do so
could damage the display.
DVI port #1 for single display setup
Display ports for power and video