5
Connecting the Display
Use only the cables and power cord supplied with your display.
To connect the display
1 Plug one end of the DVI signal cable to the DVI port on the display.
Tighten the thumbscrews to secure the connection.
2 Plug the power cord into the power input port.
3 Plug the other end of the DVI cable into the video port on the installed
controller. (Use the bottom port for a single display installation or for
the fi rst display of a dual setup.)
4 Plug the other end of the power cord into a grounded outlet.
5 Repeat steps 1 to 4 to connect a second display to the controller.
6 Power on your display fi rst, then the computer.
NOTE: See page 2 for the port assignment of functionality on the AX4 and
AX5 display controllers.
Top port
Bottom port
020-0494-00A.indd 5
020-0494-00A.indd 5
6/19/06 3:31:14 PM
6/19/06 3:31:14 PM
