Plamen 850 Glas, Техническая инструкция

Страница: 15 / 40

Make sure that the cooker is installed in a place allowing easy access for flue and
chimney cleaning operations.
Make sure that there are no combustibles in the immediate vicinity of the cooker.
The cooker may be installed only in a room where there is no risk of fire or explosion. In
case of presence of potential risk, the cooker must be unplugged.
Minimum clearances between the cooker and combustibles, such as wood,
chipboard, corkboard etc. should be strictly observed. Please refer to the data
from the Technical Data.
In case of highly inflammable materials, such as PVC, polyurethane,
pressed wood fibreboards etc., or materials of unknown inflammability, these
clearances should be doubled.
If the cooker is to be installed in a room with combustible or heat sensitive
flooring, it shall be placed on a solid, non-combustible floor protector. The floor
protector must be dimensioned to extend at least 800 mm to the front of the
cooker and 400 mm to other directions.
Operating Instructions
Before the first firing, wipe all enamelled surfaces and cooking plate first with a wet
and then with a dry cloth. Check the air supply control and flue damper for proper
operation.
The cooker performance and combustion depend on the fuel quality, adequate
chimney design and maintenance, proper flame adjustment, cleanliness of the cooker
and correct firing and reloading. The cooker is designed to burn wood, wood briquettes
and brown coal briquettes. Use only well-seasoned, dry wood with low moisture
content to reduce the likelihood of greasy soot (creosote) built-up on the chimney walls,
which may cause clogging of the chimney. Do not burn the household waste, especially
not any plastic material. Many waste materials contain substances that are harmful to
the cooker, the chimney and the environment.
15
Figure 1