3.
DSP control via Display & Encoder wheel
Note:
Certain settings can only be configured using the PL-AUDIO DSP-Control software.
Push the MENÜ-button once to call up the main menue.
The main menue contents 5 menue points:
–
–
–
–
–
Load Presets
Save Presets
Password protection / Access Level
Device informationen read out (5 additiopnal points in this sub menue)
Routing, configuration (Input routing to Outputs) Mixer in OUT 1,2,3
By pushing the MENÜ-button you can navigate in the main menue in an endless loop.
Encoder-wheel turn to select parameters and navigate in the sub menue.
Encoder-wheel pushing to confirm a setting or to jump to the next module.
EXIT-button: push once to jump back to previous menue point.
EXIT-button pushing several timnes to exit the configuration menue and take over the changed parameters.
MENU
TURN to
PL-Audio 4003
2 B18+F10pro L
SELECT
PUSH to
ENTER
EXIT
Upper line: Name of the individuak
PowerPac
PL-Audio 4003
Lower line: Number of Preset 2& short description of the preset
B18+F10pro
L
USER MANUAL PowerPac 4003 DSP
18
© PL-Audio GmbH & Co.KG | Siegener Straße 6 | 57482 Wenden | www.pl-audio.de Version: October 2021 V 1.0
