Electrical Connection
Attention:
Before the electrical connection of the device, it must be ensured that the sup-
ply voltage corresponds to the required one and that the supply voltage is switched off.
•
The general VDE regulations (VDE0100, VDE0113, VDE0160) must always be
observed for the electrical installation.
•
If a safety extra-low voltage is applied to the potential-free contact, care must be
taken to ensure sufficient insulation of the connecting cables up to the terminal
point, otherwise the double insulation on the mains voltage side will be impaired.
•
The electrical connection is made via the terminals in the connection head.
•
The exact pin assignment can be found in the drawings.
Relay:
Transistor:
Option plug connector M8:
PIN
Color
Connection
1
brown
+U
V
2
white
GND
3
black
contact 13 N/O (S)
4
blue
contact 14 N/O (GND)
DTL04 Instruction manual 07/2019
page 4
