27
given on their packaging.
11.
Dry dryer-proof fabrics only. Observe the information on the labels.
12.
If you install the appliance on a carpet or carpeted floor, ensure proper air
circulation by adjusting the adjustable feet.
13.
Do not place any items liquid can escape from on the appliance as the liquid can
damage the control panel.
14.
Metal-made items, e.g. keys, screws, coins etc., can damage the appliance. Check
that your laundry is free of such items.
15.
Do not overload the appliance.
16.
Do not put dripping-wet laundry in the appliance.
17.
The room temperature should not be less than +5 °C and not more than +35°C
when operating the appliance.
18.
Clean the filter after operating the appliance.
2. Installation
2.1 Unpacking and positioning
1.
Unpack the appliance carefully. Dispose of the packaging as described in
chapter waste management.
2.
Completely remove the transport-protection. Be very careful and do not use any
aggressive or abrasive detergents to remove residuals of the transport-
protection.
3.
Check that the appliance and the power cord are not visible damaged.
4.
Do not install the appliance in a place where it may come in contact with water
or rain; otherwise the insulation of the electrical system will be damaged.
5.
Install the appliance on a
level, dry and solid floor
. Check the correct
installation with a bubble level.
6.
Remove the complete packaging material ( inside and outside the appliance)
before initial operation.
7.
The nameplate is situated inside the appliance or at the back.
