~
59
~
I
NSUFFICIENT EXTRACTING CAPACITY
.
1.
Too much distance hood-hob.
1.
Lower position of hood.
2.
Too much draught because of open
doors and/or windows.
2.
Close the doors/windows.
A
PPLIANCE IS UNSTABLE
.
1.
Screws are not firmly tightened.
1.
Tighten the screws.
2.
The mounting bracket / mounting
plate is not fixed firmly.
2.
Fix the mounting bracket /
mounting plate properly.
If the appliance has a malfunction not noted on the schedule or if you have
checked all items on the schedule but the problem still exists, please contact the
shop you purchased the appliance at.
I
F THE HOOD DOES NOT WORK PROPERLY AND
/
OR YOU CAN HEAR
INCREASED OPERATING NOISE
,
CHECK THE SCHEDULE BELOW
.
➢
Incorrect dimension of the air duct.
➢
Obstruction in the air duct.
➢
The diameter of the air duct from hood to wall-box inclusive should be 120 mm;
otherwise the capacity of the motor may be decreased.
➢
If you have installed a fly screen on the wall-box, the air vent may be obstructed.
Check by removing the fly screen.
➢
If the cover panel of the wall box is equipped with firm and slanted slats, the air
vent may be obstructed. Check by removing the cover panel.
➢
Install a cover panel with moveable slats, which do not obstruct the air vent.
➢
Check condition and cleanliness of the filters.
➢
Check if the air which is extracted by the hood is replaced to avoid negative
pressure.
➢
When you run your appliance in recirculating mode, check if the carbon filter has
been replaced on time (min. every 3-6 months).
